Artículo
    Ref.: Mammoth

    Ringmat Feet are a vibration control product for the base of your hi-fi and home cinema equipment and speakers. They represent another innovative product from the designers of RINGMAT and STATMAT.

    • Cleaner, crisper sound;

    • Greater resolution and separation;

    • Wider, deeper soundstage;

    • Enhanced power and dynamics;

    • Improved sense of timing and rhythm;

    • Clearer intonation and voice inflections;

    • Clearer ambience of recording venue;

    • Simply more natural, more musical


    Use RINGMAT FEET with:

    • Turntables;

    • CD players;

    • SACD players;

    • DVD players;

    • Tuners;

    • Tape players;

    • Amplifiers;

    • A/V amplifiers;

    • Power supplies;

    • Loudspeakers;

    And any other item of hi-fi or home cinema equipment.

     

    A FIRM FOUNDATION FOR VIBRATION CONTROL
    As a music lover, you are as selective about your hi-fi equipment as you are about your music. Similarly, if you are a home cinema enthusiast, you will be as concerned about the

    picture as well as the sound. That’s why Ringmat Developments has designed another product to help you get the best possible sound and picture during playback – RINGMAT FEET.

     

    RINGMAT FEET control and disperse the mechanical and electrical vibrations that would otherwise spoil the sound quality of hi-fi and the sound and picture of home cinema systems. These vibrations are natural by-products of any hi-fi or home cinema system, and they cause loss of information and signal phase distortions.
     
    RINGMAT FEET minimise the effect of these vibrations.

    You’ll notice the difference immediately.

    Just place Ringmat Feet under each foot of a hi-fi component and hear your music come to life!

     

    RINGMAT TECHNOLOGY AT WORK
    Constructed from a careful selection of materials, RINGMAT FEET work in much the same way as a RINGMAT, controlling the mechanical vibrations and the effects of resonance by decoupling equipment from their support surfaces and dispersing vibrational energy into the air in and around the FEET.

    Through the inclusion in each set of RINGMAT FEET of a STATFOOT, based on our STATMAT technology, the problems of electrical vibration (static and the interaction with unwanted electromagnetic fields) are also noticeably reduced. This is achieved by decoupling electromagnetic fields by breaking the contacts between the equipment and their support surfaces.


    The problem with mechanical and electrical vibrations is that they corrupt the signals by introducing phase errors and therefore contaminate the sound of hi-fi systems and reduce the picture quality in home cinema systems. By using RINGMAT FEET, the result is a cleaner, crisper sound, that’s far more musical and closer to the original recording, and in the case of home cinema systems, an improved picture.

     

    RINGMAT FEET DEVELOPMENT
    Since their launch in 1999, there have been constant design improvements in the materials used to make RINGMAT FEET. Nearly all the materials used have now been changed to ones that work to a higher specification, and with each change an improvement in sound quality has usually resulted. No other form of component support matches RINGMAT FEET. From the beginning of 2005, the range of RINGMAT FEET available expanded from 2 to 5.

    The 5 types of RINGMAT FEET are:

    • CHEETAH (previously called Lightweight (LW) Feet)

    • TIGER (previously called Heavy Duty (HD) Feet)

    • INDIAN JUMBO

    • AFRICAN JUMBO

    • MAMMOTH

    RINGMAT FEET are constructed according to core Ringmat principles of dispersing vibration into the air in a controlled manner without oscillation. They consist of an arrangement of discs and concentric rings, very much like RINGMATS. Principally, there are two plastic discs between which are a cork ring and a thicker poron spiral spring within that ring - poron is a rapid recovery material used in the aerospace industry. There are two foam rings under the lower disc and the cork ring on top of the lower disc flexes the lower plastic disc between the foam rings. On the top is a smaller, centrally placed, plastic covered steel disc that flexes and pressures the top plastic disc within the cork ring below.

    The flexing of the plastic discs and the compression of the foam rings combine to absorb and disperse the vibrations and any resonance affecting any item of equipment that rests on the Feet. The degree of flexing and compression depends upon the weight of the equipment being supported. Too much or too little weight either over-flexes/over-compresses or under-flexes/under-compresses the relevant components and therefore it is important that the Feet chosen are the right ones for the weight of equipment to be supported. Accordingly, we use variations in the number and thickness of the plastic discs used, the thickness and density of the foam and the thickness of the cork rings and poron spirals, and the number of poron spirals to achieve to appropriate blend for each weight range up to 69 kilos.

    There are variations in the weight ranges according to the number of RINGMAT FEET used. Of course, this has to correspond to the number of ‘feet’ or cones used under the item of equipment to be supported, or, for example, the number of RINGMAT DOMES used in place of the equipment’s own feet (or where the equipment has no ‘feet’ of its own, such as may be the case with loudspeakers).

     

    SPECIFICATIONS
    The specifications for he present range of RINGMAT FEET are as follows:

     

    Model

    Weight Bearing

    Nominal

    Thickness

    Overall

    Diameter

    4 Feet

    3 Feet

    Cheetah

    Up to 13kg

    Up to 10.5kg

    7.7mm

    73.5mm

    Tiger

    13 to 21.5kg

    10.5 to 18kg

    8.8mm

    73.5mm

    Indian Jumbo

    21.5 to 39kg

    18 to 34.5kg

    11.5mm

    73.5mm

    African Jumbo

    21.5 to 39kg

    18 to 34.5kg

    11.5mm

    98.0mm

    Mammoth

    39 to 69kg

    34.5 to 62kg

    14.0mm

    98.0mm


     

    OTHER CONSIDERATIONS
    For best results where cones are used, the smaller contact area, or ‘point’, should be uppermost under the equipment itself, not pointing down into the support surface below.

    To avoid oscillation, one RINGMAT FOOT in any set of 3 or 4 FEET operates in a stiffer fashion to the others in the set. The same approach is used for RINGMAT DOMES. Contrary to expectations, the stiffer RINGMAT FOOT (or denser RINGMAT DOME) should always be used under the least weight bearing corner or other support area of the item to be supported.

    RINGMAT FEET must rest on a flat surface. Usually, this would be a hard surface, such as found with shelves and floors, but some users report that they have achieved very good results on carpet. However, with some carpets there could be difficulty in keeping the Statfeet flat.


    With each set of RINGMAT FEET there is one STATFOOT, which is a square of our patented anti-static film. The STATFOOT is to be used beneath one, but only one, of the RINGMAT FEET in accordance with the instructions included with each set of FEET. STATFEET can also be used on their own by placing them under one, but only one, ordinary foot of each component, which can include loudspeakers as well as electrical equipment. STATFEET not only improve the sound but also the picture quality in home cinema systems. STATFEET can therefore be used separately throughout the reproduction system and for economy they are available in packs of 6. Moreover, one STATMAT used on top of another in the same position increases their power, and therefore their performance. For more information about STATFEET, click here.


    In addition to RINGMAT FEET, we recommend using the RINGMAT DOMES in place of the ordinary feet that are supplied with items of equipment, where such a substitution is appropriate. For example, where the base plate or other form of base used (such as the bottom of loudspeakers) can bear the weight in the required position without bending the base plate or otherwise causing possible damage.

    RINGMAT DOMES are made of compressed cork with a domed top and flat bottom and are far superior to conventional cones. For more information about RINGMAT DOMES, clickhere.

    RINGMAT FEET and RINGMAT DOMES can be used on their own but used together they produce an even better result. 

    OUR MISSION: TO ACHIEVE THE BEST SOUND AND PICTURE POSSIBLE

    RINGMAT FEET are one of a family of Ringmat products that effectively reduce information loss and phase distortion. Much of this information loss and phase distortion comes about through mechanical and electrical vibrations in sound and home cinema reproduction systems. Ringmat Developments is continually researching new techniques in its quest to eliminate these unwanted vibrations.


     


    1. Unidades disponibles: 2
    Ringmat Feet (pies) modelo Mammoth (juego de 4 unidades)
    120,00 €
    75,00 €
    IVA incluido
      Stock bajo
    Marcas
    Ver todas las marcas
    Atención al cliente
    (+34) 983 10 14 81
    • Código QR

    Ocultar este mensajeAtención: utilizamos cookies propias y de terceros para realizar el análisis de la navegación de los usuarios y, así, mejorar nuestros servicios. Si continúa navegando, consideramos que acepta su uso. Puede cambiar la configuración u obtener más información aquí.